Isotonik Studios Logo

Repeat PRO by NOISS COKO (EXCLUSIVE)

MaxforLive MIDI Sequencer

£23.00

You need to be logged into the account that you previously purchased Grainloop with to qualify for this exclusive offer…

Repeat Pro is a Max for Live MIDI effect, designed to easily program rhythmic and melodic patterns step by step, then played by synthesizers, samplers and other instruments, both inside and outside Live.

User Guide:

Repeat Pro

Developer: Noiss COKO
Compatibility: Ableton Live 10.1.9+ or Live 11
OS: Mac & Windows
Min. Requirements: Ableton Live 10.1.9 or Live 11 & MaxforLive 8.1.1

Description

Repeat Pro is a Max for Live MIDI effect, designed to easily program rhythmic and melodic patterns step by step, then played by synthesizers, samplers and other instruments, both inside and outside Live.

The follow up to the hugely successful Repeat device, Repeat PRO has been rebuilt from the ground up with a swathe of new features.

The whole device is exclusively driven by a sixteen step sequencer, which among other parameters allows to set a different note, velocity, length, octave, control and delay amount for every single step. Part of Repeat Pro’s magic resides on the uncertainty factor that surrounds its behavior and defines the state of its most important parameters.  

Main features and functions

  • Sixteen step MIDI sequencer.
  • Note, Velocity, Length, Octave, Control and Delay values for each step.
  • Complete Push integration (only for Push 2).
  • Store and recall up to 64 presets.  
  • Control Change messages for external instrument modulation.
  • Program Change messages for external instrument preset control. 
  • Map function for Ableton Live parameter modulation. 
  • Mute and Skip buttons.  
  • Random function applied over all the individual step parameters. 
  • Random window allows to constantly randomise most importan parameters. 
  • Five sequence Playback modes: Right, Left, Pong, Other and Any. 
  • Three Rate modes: Sync, Free and Track.

Reviews

There are no reviews yet.

Be the first to review “Repeat PRO by NOISS COKO (EXCLUSIVE)”

CHANGE LOG

V1.2 – Released 28th December 2020

– Fixed Mute and Skip values not being saved with Live/Max latest versions. 

– Fixed Pong mode not playing immediately after Live session is reopen. 

– Fixed Change slider not showing when Live session is reopen. 

– Fixed Random (Repeat button) function sometimes being stuck with Note values when using Push 2 as control surface.  

V1.1 Released 16th July 2020

Now it’s possible to define two different behaviors for the Follow Mode! A new toggle is found on the Settings Window, which allows the sequence to be reset every time a MIDI Note is received. Besides working as a tracking function for the Root key, incoming MIDI Notes will only turn the Play button on and off, or also reset the counter and play the sequence from its first active step. 

Initial Release – 1st June 2020

REVIEWS & FEATURES

FEATURES

STRONGMOCHA

INSTALLATION

Our Products are generally provided as Zip file downloads which in all cases will need to be extracted and saved to your hard drive prior to installation. Details on the different file type provided and what to do with them are below.

.alp Files – These are Ableton Live Packs and will install directly into the Packs Section of the browser of Ableton Live. When you double click on them you will see a pop up window asking you to confirm that installation is ok as the files are described as “Legacy”. This is fine and you are ok to proceed, the packs are created using the format for an earlier version of Live and so remain compatible with the current version.

.amxd files – These are individual MaxforLive Devices and can be stored anywhere on your hard drive. We’d advise creating a folder for them and then adding that folder as a location within the Places section of Lives Browser.

Control Surface Scripts – Please refer to the individual User Guides provided with your download, an abridged version of the installation will be shown further down this page.

ClyphX Pro – Please refer directly to the manual and installation video for this specific product.

Novation Circuit Packs – These are provided as individual Sysex Files and as a complete bank file. All are to be installed using a version of the Circuit Editor and not via Novations Components back up utility.

DEVELOPER

Noiss Coko

Formally set up in 2016 and currently based in Barcelona, NOISS COKO is a flourishing brand of music production software, mostly dedicated to the development and design of fine Max for Live devices for Ableton Live users.With a strong emphasis on the integration of an intuitive and clear user interface, the main goal behind its products has always been the introduction of instruments and tools that would enhance the experience of making music and working with sound, extending this beyond the given possibilities of Ableton Live. Shortly after its first release came out, the project joined in as an active part of our collective and has published various products in collaboration with us ever since. However, early ideas and prototypes started off many years before that and were followed by a long process of research and experimentation around the field of electronic music production. All this experience accumulated throughout that time, ultimately gave birth to the first group of devices that later became part of both the Modulation Pack and the Control Pack.Besides all the products that are now available exclusively within our web store, NOISS COKO continuous to work on forthcoming projects and new devices to be released in the near future.   Link > Facebook 

View more products from this vendor

12 WEEKS OF CHRISTMAS

Ok, so we know it’s the New Year now, we’re going to carry on for as long as we can with a Free Stuff Friday each week…

Sign up now for Twelve  EIGHTEEN WEEKS of Christmas Giveaways!