SONG:LOOPER:MODE by KB Live Solutions

Combines SONG & LOOPER:MODE in one Controller Script!


SONG:LOOPER:MODE lets you easily monitor and control up to 16 Looper devices on a single page. You can view and control the state of the Looper, along with the Mute and Arm status of the track.Additionally it provides you with a completely new and simple way to play your songs based on scenes.
COMPATIBILITY: Ableton Live 10 / 11 – Push One, Push TWO, LaunchPad MKII, MINI MK3, X & Live 10.1
Min. Requirements: Push One, Push TWO, LaunchPad MKII, MINI MK3, X & Live 10.1
Play Video



    There are no reviews yet.

    Be the first to review “SONG:LOOPER:MODE by KB Live Solutions”


    Our Products are generally provided as Zip file downloads which in all cases will need to be extracted and saved to your hard drive prior to installation. Details on the different file type provided and what to do with them are below.

    .alp Files – These are Ableton Live Packs and will install directly into the Packs Section of the browser of Ableton Live. When you double click on them you will see a pop up window asking you to confirm that installation is ok as the files are described as “Legacy”. This is fine and you are ok to proceed, the packs are created using the format for an earlier version of Live and so remain compatible with the current version.

    .amxd files – These are individual MaxforLive Devices and can be stored anywhere on your hard drive. We’d advise creating a folder for them and then adding that folder as a location within the Places section of Lives Browser.

    Control Surface Scripts – Please refer to the individual User Guides provided with your download, an abridged version of the installation will be shown further down this page.

    ClyphX Pro – Please refer directly to the manual and installation video for this specific product.

    Novation Circuit Packs – These are provided as individual Sysex Files and as a complete bank file. All are to be installed using a version of the Circuit Editor and not via Novations Components back up utility.


    Live 11 Version – Released 12/2/2021

    • Additional Files provided for Live 11 compatibility

    Version 1.1 – Released 5th October 2020

    • Fixes a bug that could prevent SONG:LOOPER:MODE and LOOPER:MODE from working

    Initial Release – 29th September 2020

    SONG:LOOPER:MODE by KB Live Solutions

    SONG:LOOPER:MODE is a Control Surface Script for Ableton Live 10 that lets you use your Push or supported LaunchPad in a different way, and makes it possible to have your whole set on a single page. It also provides a convenient way to use your Arrangement Markers and Looper devices.

    To activate SONG:LOOPER:MODE:

    • on the Launchpad Mini MK3, press the User button
    • on the Launchpad MK2, press the User 2 button
    • on the Launchpad X, press the Custom button
    • on the Push ONE & TWO,, press the User button

    On the LaunchPads the button will then turn Yellow. To switch back to the original User/Custom mode, press the button once again (it will be back to its normal color).

    SONG:LOOPER:MODE has 3 views. One is dedicated to the Arrangement view, one for Session view,and one for the Looper view.

    • In Arrangement view, the pads will correspond to Markers
    • in Session view, they will correspond to Scenes.
    • in Looper view, they will correspond to Loopers devices.


    To select Arrangement view, press the Note button, to select Session mode, press the Session button.

    For the Session and Arrangement views, there are 2 possible layouts : a “Simple” and an “Advanced” one.

    • The Simple layout reflects the Scenes or Markers in a straightforward manner : 1 pad = 1 Scene/Marker.
    • The Advanced layout allows you to group several Scenes or Marker within a “Song”.

    To toggle between layouts, press the Layout button (Select Button on Push 1).


    To toggle between the 2 views, press the Session/Arr Toggle button. In Session mode, it will be Purple,and in Arrangement mode it will be Pink.

    The Session/Arr Toggle button also changes the active Session / Arrangement view in Live.

    For the Session and Arrangement views, there are 2 possible layouts : a “Simple” and an “Advanced” one.

    • The Simple layout reflects the Scenes or Markers in a straightforward manner : 1 pad = 1 Scene/Marker.
    • The Advanced layout allows you to group several Scenes or Marker within a “Song”.


    SONG:MODE is so simple and effective it should become the mainstay of your Live performance. As your Live set naturally grows the navigation around it and keeping track of your songs starts to become a challenge of a multitude of button presses to locate and trigger your next song. With SONG:MODE your next song is literally one button press away.

    With the launch of SONG:MODE V2 we’ve extended the usage of the script in two ways, first up the new functionality working in both SESSION and ARRANGEMENT views, secondly for each view there are two separate working modes, SIMPLE & ADVANCED:

    • The “Simple” layout is very straightforward, with 1 Pad = 1 Scene or Marker, and works straight out of the box.
    • The “Advanced” layout allows you to group Scenes or Markers into “Songs”, as this was already the case on SONG:MODE 1.0.
    • Other new features:
      • Toggle between Arrangement and Session views from the controller
      • Set a Loop in Arrangement by holding several pads, toggle the Loop from the controller
      • Add colors to Markers, Scenes or Songs directly from the controller
      • “Safe/Restart” function to always launch playback from the last position or in case of accident
      •  When adding (STOP) to a Marker or Scene’s name, Live will stop
      • Stop All Clips / Back to Arrangement button
      • Arrangement Record (Only for Push 1 & 2 and Launchpad X)
      • Improved the way SONG:MODE is activated on Launchpad Mini MK3 and Launchpad X


    Select the Song Mode LaunchPad script applicable to your controller in the Control Surface section of Lives preferences and assign the LaunchPad to its input and output. Then to activate SONG:MODE you simply press the User/Custom button.


    Select the Song Mode Push script applicable to your controller in the Control Surface section of Lives preferences and assign the Push User Ports to its input and output. Then to activate SONG:MODE you simply press the User button.


    All the Scenes and Markers are accessible directly from the Controller, and they are automatically detected.

    In Arrangement view,  you can add Markers by pressing the New button, and set a Loop by holding the Marker’s pads.

    You can assign colors to pads (both for Markers and Scenes) directly from the controller.


    Advanced layout allows you to group several Scenes or Markers into virtual “SONGS”.

    Once set up, the top half of the pad matrix of your LaunchPad lets you select a SONG, and then the bottom half will display and launch the Scenes that belong to this SONG. The selected SONG will blink, the playing SONG and Scene will blink in Green.

    To add a Scene to a specific SONG, you just need to add (SONG#) somewhere in the name of the Scene or Marker, where # is the song number. Eg. (SONG1), (SONG2),…

    There are 3 ways to do that :

    1. You can directly rename the Scene / MarkerYou can select the Scene in Live, then hold the top right scene launch button and press the target SONG’s pad
    2. You can use the Max For Live device (see below)
    3. The pads take the Scene’s color; the first Scene or Locator will give its color to the SONG’s pad. You can change the colors from the controller itself.

    The other Modes of the LaunchPad are still available, simply press any other Mode button to exit SONG:MODE* on the LaunchPad or the User Button once more on the Push

    Other buttons :

    If your Ableton Live set contains more than 32 Songs, the upper Up/Down arrows will let you navigate through the list, and if one Song contains more than 32 Scenes or Locators, you can scroll through it by using the upper Left/Right arrows.

    • If you hold the third Scene Launch button and press a Scene pad, the (SONG#) tag will be removed from its name, and thus, the Scene will be removed from the corresponding SONG.
    • The fourth Scene Launch button toggles the Arrangement Loop button
    • The fifth Scene Launch button activates the “Stop All Clips” button, pressing it while holding Shift will activate “Back To Arrangement”
    • The sixth Scene Launch button starts and stops Live’s playback.
    • The seventh Scene Launch button  (“Safe/Restart”) launches playback from the last start position


    Have you ever been fighting with Live’s Looper and its lack of visual feedback?

    Then LOOPER:MODE is here for you. On a single page of your favorite controller, LOOPER:MODE allows you to monitor and control up to 16 Looper devices simultaneously at the push of a button.

    All you need to do is select a Looper in Live, press the “New” button of the Push or supported LaunchPad when in User Mode, and the Looper will instantly be added to the pads matrix and show 4 buttons.

    The top button will reflect the state of the Looper, and will let you change it.

    The 2nd button will show the color of the track on which the Looper is, and pressing will take you instantly to the Looper device.

    The third button will act as a Mute button for the track and the fourth button is for the Arm button.

    Of course, you can still map the Looper to your favorite pedal or use the Multi-Purpose button, and all the settings will be recalled when opening an existing set.

    More Products from.... KB Live Solutions...!


    If you fill in the form below we'll do our best to get back to you in a timely manner!

    Contact Form Demo (#3) (#4)


     Please enter a valid student or teacher email to be used for your purchases with the same URL as the website of the institution below

    As an existing customer please log into your account with the link below, you'll find our knowledge base which may answer your question and the option to submit a support ticket...


    Special Offer

    10% DISCOUNT

    on your first order When you Sign up to our Mailing List*

    *Not applicable to products on sale, cannot be combined with any other offers