Isotonik Studios Logo

LOOPER:MODE by KB Live Solutions

finally, a Control Surface script dedicated to Live's Looper

£22.00

(1 customer review)
LOOPER:MODE lets you easily monitor and control up to 16 Looper devices on a single page. You can view and control the state of the Looper, along with the Mute and Arm status of the track.
User Guide:

Launchpad Mini MK3 Installation | Launchpad MK2 Installation | Launchpad X Installation | Launchpad User Manual | Push 2 Installation | Push Installation | Push User Manual

Developer: KB Live Solutions
Compatibility: Live 10.1 and above | Live 11
OS: Mac & Windows
Min. Requirements: Push One, Push TWO, LaunchPad MKII, MINI MK3, X & Live 10.1+ or Live 11
LOOPERMODE LaunchPad Edition Infographic
LOOPERMODE Push Edition Infographic

Description

Have you ever been fighting with Live’s Looper and its lack of visual feedback?

Then LOOPER:MODE is here for you. On a single page of your favorite controller, LOOPER:MODE allows you to monitor and control up to 16 Looper devices simultaneously at the push of a button.

All you need to do is select a Looper in Live, press the “New” button of the LaunchPad when in User Mode, and the Looper will instantly be added to the pads matrix and show 4 buttons.

The top button will reflect the state of the Looper, and will let you change it.

The 2nd button will show the color of the track on which the Looper is, and pressing will take you instantly to the Looper device.

The third button will act as a Mute button for the track and the fourth button is for the Arm button.

Of course, you can still map the Looper to your favorite pedal or use the Multi-Purpose button, and all the settings will be recalled when opening an existing set.

PLEASE NOTE: ALSO AVAILABLE AS A COMBINED SCRIPT WITH SONG:MODE – SONG:LOOPER:MODE – LaunchPad Edition

1 review for LOOPER:MODE by KB Live Solutions

  1. Sylvain Blerol (verified owner) –

    Very practical and also….support was very fast to help when i had a problem to make it work at begining:-) I’ll buy more of their tool and devices:-)

Add a review

CHANGE LOG

Live 11 Version – Released 12/2/2021

  • Additional Files provided for Live 11 compatibility

Version 1.1 – Released 5th October 2020

  • Fixes a bug that could prevent SONG:LOOPER:MODE and LOOPER:MODE from working

Initial Release – 29th September 2020

INSTALLATION

Our Products are generally provided as Zip file downloads which in all cases will need to be extracted and saved to your hard drive prior to installation. Details on the different file type provided and what to do with them are below.

.alp Files – These are Ableton Live Packs and will install directly into the Packs Section of the browser of Ableton Live. When you double click on them you will see a pop up window asking you to confirm that installation is ok as the files are described as “Legacy”. This is fine and you are ok to proceed, the packs are created using the format for an earlier version of Live and so remain compatible with the current version.

.amxd files – These are individual MaxforLive Devices and can be stored anywhere on your hard drive. We’d advise creating a folder for them and then adding that folder as a location within the Places section of Lives Browser.

Control Surface Scripts – Please refer to the individual User Guides provided with your download, an abridged version of the installation will be shown further down this page.

ClyphX Pro – Please refer directly to the manual and installation video for this specific product.

Novation Circuit Packs – These are provided as individual Sysex Files and as a complete bank file. All are to be installed using a version of the Circuit Editor and not via Novations Components back up utility.

DEVELOPER

KB Live Solutions

With a classical training of more than 10 years at the conservatory, Pierre-Antoine Grison also followed scientific studies (Master of Physics, Telecommunications Engineer) before devoting himself fully to his passion: music. For 10 years, he toured the world and released a few albums on Ed Banger Records with his own project Krazy Baldhead, or with other projects : Donso, a mix of electronic and Malian music, or a collaboration with Malian singer Inna Modja. In addition to these activities, he has been a beta and alpha tester for Ableton since 2006, and he naturally became an Ableton Certified Trainer in 2016. With this broad background, he intends to provide solutions to musicians and technicians wishing to use the computer on or off stage, offering a complete range of solutions: training, consulting, and custom controller design.

View more products from this vendor

You may also like…