PrEditor 2 & Novation LaunchControl XXL – Combo Pack

Price £55.00

The Novation LaunchControl XL get’s a supercharge with this extended Control Surface Script with particular focus on Device and Send/Return Control, hook it up with PrEditor and define banks of 24 parameters at a time…

  • 24 Pots control parameters of the currently in focus device
  • Device left/right & on / off
  • Parameter bank up / down
  • Track volume & track select
  • Return Track Control with user configuration
  • The option to have three sends as standard rather than just two and the Pan control
  • User configuration of the number of tracks each press of the Track Left or Right will increment in

Quantity:

Featured Videos
LAUNCHCONTROL XXL - WALKTHROUGH PART ONE
LAUNCHCONTROL XXL - WALKTHROUGH PART TWO
LAUNCHCONTROL XXL - LAUNCHSYNC DEMO
PREDITOR 2 - INSTALLATION
PREDITOR 2 - LIVE INSTRUMENTS & EFFECTS
PREDITOR 2 - LIVE MAPPING FEATURE

Description

The Novation LaunchControl XL get’s a supercharge with this extended Control Surface Script with particular focus on Device and Send/Return Control, hook it up with PrEditor and define banks of 24 parameters at a time…

  • 24 Pots control parameters of the currently in focus device
  • Device left/right & on / off
  • Parameter bank up / down
  • Track volume & track select
  • Return Track Control with user configuration
  • The option to have three sends as standard rather than just two and the Pan control
  • User configuration of the number of tracks each press of the Track Left or Right will increment in

NOTE: This Combo Pack consists of both PrEditor 2 & the LaunchControl XXL Control Surface Script

CLICK HERE TO DOWNLOAD – PrEditor 2 User Guide

There are no reviews yet.

Add your review

Our Products are generally provided as Zip file downloads which in all cases will need to be extracted and saved to your hard drive prior to installation. Details on the different file type provided and what to do with them are below.

.alp Files – These are Ableton Live Packs and will install directly into the Packs Section of the browser of Ableton Live. When you double click on them you will see a pop up window asking you to confirm that installation is ok as the files are described as “Legacy”. This is fine and you are ok to proceed, the packs are created using the format for an earlier version of Live and so remain compatible with the current version.

.amxd files – These are individual MaxforLive Devices and can be stored anywhere on your hard drive. We’d advise creating a folder for them and then adding that folder as a location within the Places section of Lives Browser.

Control Surface Scripts – Please refer to the individual User Guides provided with your download, an abridged version of the installation will be shown further down this page.

ClyphX Pro – Please refer directly to the manual and installation video for this specific product.

Novation Circuit Packs – These are provided as individual Sysex Files and as a complete bank file. All are to be installed using a version of the Circuit Editor and not via Novations Components back up utility.

CHANGE LOG 2.0.8 - The “Log” controller parameter is now shown in red when enabled to remind users to turn it off when not generating diagnostic info - Updated text in a couple of dialogs to make things clearer - Fixed issue where racked devices couldn’t be scanned if auto-scan was enabled - Fixed BCR always loading 24 device maps even when 32 was specified - Fixed couple minor script issues 2.0.7 - Added additional dialogs to help people with initial install/setup - Fixed a sporadic issue loading P1 migrated data - Fixed a sporadic licence validation issue - Fixed issue on 10.0.1 where echo, pedal, drumbuss and wavetable were categorised as M4L devices - Fixed issue with custom parameter naming for extended mapping - Re-enabled custom parameter names for M4L devices 2.0.6 - Updated the reporting issues dialog at startup so hopefully someone will read it - Custom/Single buttons are no longer available when selecting empty VST/AU/M4L category - Added a minimum version check to tell users when the version of scripts installed is below required minimum - Added a dialog to tell users to switch to Extended map mode if they’re trying to Live map a parameter from a device that is not in the default parameter set (Live/M4L) - Disabled custom parameter names for M4L devices whilst an issue is investigated - Fixed issue selecting M4L devices on Windows - Fixed issue where after the report information dialog had been shown, PrEditor needed a restart - Fixed display issue when selecting last parameter of a device   2.0.5 - config.xml is now added to the generated report file - No longer possible to create blank entries for aliases/skip - Fixed an issue where it wasn’t possible to scan a M4L device that had 0 parameters exposed - Removed load all & save all as they’re not really needed and just seem to cause confusion 2.0.4 - Fixed a display issue meaning displayed parameter names were offset by 1 - Dialog box now presented if options.txt cannot be updated 2.0.3 - Rack name changes are now picked up immediately - Added additional info to report generation - Removed maximise button - Extended mapping adding for Simpler - Push2 visualisations added for AutoFilter, Echo, Simpler - Fixed issue with custom installs not being retrieved correctly - Fixed issue with reports not being generated when custom install selected - OSX version now runs down to 10.7 2.0.2 - Fixed an issue changing between Push2 and Push2_XL scripts 2.0.1 - Added auto-live-map mode - Added a dialog at startup if PrEditor data directory cannot be created - Fixed an issue with multi-scan not naming duplicate parameter properly 2.0.0 - Initial version PLEASE NOTE: The following limitations currently exist. We hope to resolve these in future updates:
  • Visual devices (Auto-filter, Compressor, Echo, EQ8, Operator, Simpler, Wavetable) can be customised but visualisations cannot be applied to the customised devices (Push).
  • Extended mapping cannot be used for Simpler (All)
  • There are issues with behaviour of certain parameters when providing custom options (see 9.2) (Push).
  • Having a parameter on multiple banks with options specified can cause incorrect display – it is advised to currently only have one instance of these (Push).